Nano Wash - Ceramic Wash

Nano Wash - Ceramic Wash

Our Nano Wash - SiO2 Wash boat soap is a pH-neutral marine wash that uses ultra-high-concentration SiO2 (silicon dioxide) technology to deposit an ultra-thin ceramic coating layer with every wash. Clean and refresh in one pass, no separate ceramic application step required. Naturally berry-cherry-scented and safe for aquatic life. Full SiO2 concentration and formula specifications available on the attached Safety Data Sheet.

This pH-neutral formula is safe on coated and uncoated surfaces alike, and won't strip existing wax, sealant, or ceramic protection. For a deeper strip-and-reset before your next SiO2 layer, pair with Reel Clean or Strip-Tide.

Wash. Bond. Repeat.

Key Features:

• Builds and reinforces existing wax, sealant, or ceramic coating layers
• pH neutral — safe for coated and uncoated surfaces
• Adds shine, hydrophobicity, and UV protection with every wash
• Safe on gelcoat and painted surfaces
• Ultra-concentrated SiO2 formula
• Made in the USA

How to Use - Foam Cannon

1. Pre-rinse the surface to remove loose dirt and debris.
2. Load Nano Wash into your foam cannon reservoir.
3. Apply foam from bottom to top.
4. Let dwell for 2-3 minutes.
5. Agitate stubborn spots with a soft wash mitt as needed.
6. Rinse thoroughly.
7. Dry with a Sandman's Drying Towel.

How to Use - Bucket Method

1. Pre-rinse the surface.
2. Mix 4-6oz per gallon of water.
3. Wash using the two-bucket method.
4. Rinse thoroughly.
5. Dry with a clean microfiber or Sandman's Drying Towel.

✅ Safe to Use On:
Waxes, polymer sealants, and ceramic coatings · Paint sealants · Gelcoat · Cured automotive paint · Stainless steel, aluminum, chrome · Powder-coat (cured) · Vinyl / isinglass · Glass · PPF · Hydrophobic glass coatings

❌ Do NOT Use On:
Matte/satin finishes (adds gloss) · Fabric upholstery · Fresh paint under 30 days cured · Hot surfaces or direct sun

Pro Tips from the Field

• Weekly maintenance wash between Reel Clean / Strip-Tide strip cycles.
• Two-bucket method with a grit guard to avoid swirl marks.
• "Bottoms Up!" — apply foam bottom-to-top for even coverage.
• 4-6oz per gallon is the sweet spot.
• Boost Coat isn't necessary after Nano Wash since it already deposits ceramic — but fully compatible if you want extra gloss.
• Work in the shade.
• Rinse your foam cannon between products.
• Glass sees an immediate hydrophobic benefit.
• Same product, boats and vehicles.

Pair With: Boost Pro · Sandman's Drying Towels · Reel Clean · Strip-Tide