Ceramic Maintenance Kit - Subscribe & Save

Wash. Dry. Boost.

The complete maintenance kit for ceramic-coated boats and vehicles. Nano Wash cleans and adds a fresh SiO₂ layer with every wash, Sandman Drying Towels dry the surface streak-free, and Boost Coat PRO tops it off with a high-build ceramic layer for gloss, water beading, and UV protection. Three products, one routine, no guesswork.

What's Included:

• Step 1 – Nano Wash Ceramic Wash (16 oz)
• Step 2 – Sandman Drying Towels (pack of 3)
• Step 3 – Boost Coat PRO Wax & Ceramic Boost Coating (16 oz)

How to Use the System

1. Wash with Nano Wash. Work in the shade on a cool surface. Pre-rinse to remove loose dirt. Foam cannon: apply bottom to top, dwell 2–3 minutes, agitate stubborn spots with a soft mitt, and rinse thoroughly. Bucket: mix 2 oz per 5-gallon bucket of water, use the two-bucket method, and rinse thoroughly.
2. Dry with Sandman Drying Towels. Blot or drag the towel across the surface to remove all standing water. Rotate to a dry side as needed. Set aside two clean, dry Sandman towels for Step 3.
3. Boost with Boost Coat PRO. Once the surface is fully dry, work in the shade on a cool surface (50°F–90°F). Fold a clean Sandman Drying Towel in four and spray 2–3 pumps of Boost Coat PRO onto the towel, never directly on the surface. Apply one panel at a time in overlapping passes, then immediately come behind with a second Sandman towel that has no product on it and wipe off the excess residue to a uniform finish. Keep the surface dry for at least 1 hour. Full cure is reached in 24 hours.

Important

• Not for matte or satin finishes. Both Nano Wash and Boost Coat PRO add gloss.
• Do not apply Boost Coat PRO to non-skid. It creates a slip hazard.
• Avoid fresh paint cured less than 30 days, hot surfaces, and direct sun.
• Don't top Boost Coat PRO with wax or sealant. It is the protection layer.
• See each product page and SDS for full safety information.

Made by detailers. Made in the USA.