Morpheus Drying Towels

Most drying towels were designed for driveways. Morpheus was designed for the dock.

Salt spray, rain, lake water, and rinse-downs - boats see a different kind of wet than cars do. The Morpheus Drying Towel is built for that reality. At 1200 GSM and a massive 2'x3', it pulls water off fiberglass, gelcoat, and non-skid in a single pass - no streaks, no water spots, no wringing out mid-job.

One towel. Whole boat. Done

How to Use

1. After rinsing, unfold fully and lay the towel flat against the surface.
2. Use long, straight passes - do not use circular motions.
3. Flip to the dry side as needed.
4. Wring out when saturated and continue.
5. Machine wash cold, tumble dry low. Do not use fabric softener.

✅Safe To Use On

Fiberglass · Gelcoat · Painted surfaces · Clear coat · Ceramic coatings · Glass · Chrome · Stainless steel · Vinyl · Windshields

❌Do Not Use On

Hot surfaces · Textured non-skid (use a brush instead) · Surfaces treated with uncured coatings

Pro Tips

• Pair with Sea Lift or Reel Clean - rinse the boat, then dry immediately with Morpheus before water spots form in the sun.
• Keep one on the boat, one in the bag. The 2'x3' size handles a full hull; a second towel means you always have a dry one ready.
• After saltwater use, rinse the towel with fresh water before washing to extend its life.
• Lay flat or hang to dry after use - never store damp in a bag.